Skip to content

Table Top Epoxy

$114.00

Table Top Epoxy 1:1

Pot Life 5 min / Working Time 45-48 min / Cure Time 24 Hours / Full Cure 3-4 days / Re-Coat 12 hours

Highly UV Resistant, High Gloss, ZERO VOC – Essentially Odorless, High Heat Resistance, Chemical Resistant, Impact Resistant

Meets USDA requirements for Food Contact

This material cures blush-free and provides an outstanding balance of physical strength and flexibility

E2U Tabletop Epoxy is a self-leveling, zero VOC, essentially odorless epoxy, typically applied in a single coat. It meets USDA requirements for incidental food contact. This material cures blush-free and provides an outstanding balance of physical strength and flexibility. Generally used as a thinner coat over wood tables or to put decorative things in such as pennies, plastic, figurines…etc.

SKU: e2u-TTE-KT-CL-1G Category:

MIXING:

The ratio of Table Top Epoxy is 1 to 1. That is, one part A (resin) to one part B (hardener). Note: If using a drill /paddle mixer, use a low speed (not to exceed 300 rpm) to prevent air entrapment. E2U Epoxy is designed to be immediately poured. Leaving the mixed product in the container will greatly reduce pot life. Once poured out, 45-60 minutes of working time can generally be expected. Temperatures of 55°F and lower can slow cure times. Temperatures of 85°F and higher will speed up working and times. The optimum ambient temperature should be between 55-90°F during application

ADVANTAGES:

  • Self-leveling
  • Essentially odorless
  • Zero VOC
  • High gloss
  • Color stability
  • Long working time
  • Chemical & impact resistant
  • No anime blush
  • Highly UV resistant
  • Excellent flowability

CLEAN UP:

E2U Countertop Epoxy, while in an un-reacted state, may be cleaned up with hot water and degreaser. Isopropyl alcohol or acetone may be needed once the resin begins hardening. Lastly, a strong solvent like methylene chloride may be required if the resin is nearly set up.

Size

1-gallon, 2-gallon, 10-gallon