Skip to content

ICECAST THIN: Crystal Clear Epoxy Casting 1:1

$50.00$155.00

ICETHIN is a two-component epoxy casting system. UV resistant, it has anti-yellowing properties, strong adhesion, good fluidity, and natural defoaming. It is used for top coating or light casting with thicknesses from 1/16 inch (1.6 mm) to 1 inch (2.5 cm).

Crystal clear castings, ideal for art and hobby applications. It is formulated for a long gel time, with low exothermic heat buildup.

ICE Crystal clear epoxy used for top coating or light casting up to 1″.

USE: Resin art crafting: embedding, jewelry, molds, doming and encapsulation,with a crystal clear magnified appearance

ICETHIN has a low VOC content, for user safety and reduced environmental impact.

SKU: ICECAST-THIN-1:1-kit Category:

PRIMARY APPLICATIONS

Art or crafting resin
Embedding and encapsulation
Resin jewelry

Molds
Small castings

Bar, table, or countertop coat

 

 

 

APPLICATION
In a dry, clean container mix 1 part of resin with 1 part of hardener. Stir well along the inner wall of the container
and then let it stand for 3-5 minutes. According to the operation time and dosage, adjust the amount of glue to
avoid waste.
When the relative humidity is greater than 85%, the surface of the cured product easily absorbs moisture in the
air to form a white mist. Therefore, when the relative humidity is greater than 85%, it is not suitable for curing at
room temperature. It is recommended to use warm curing. If it is to be ground, it needs to be 3 days after it is
fully cured.

Size

32oz kit, 64 oz kit, 2-gallon kit